VML awning blinds for vertical windows

The awning blind comes with cables used to operate the fabric rolled up on the shaft. This solution enhances aesthetics of the blind fitted onto the window (no visible side guide rails), while retaining its features that protect against overheating. The awning blind is available in two radio versions: Solar and Z-Wave. It is also possible to produce the blind in such versions as Electro 230, Electro 12 and Electro Solar.

The Solar type awning blind can be operated using one of three control modes:

automatic (self-activating rolling up and unrolling dependent on the level of insolation)
semi-automatic (self-activating unrolling, rolling up via a remote control)
operation via remote control supplied

The awning blind is available in versions:

VML Z-Wave – powered by 15VDC mains supply and operated by means of a remote control or wall switch in the wireless Z-Wave system. It cooperates with FAKRO electric products equipped with the Z-Wave system (e.g. FTP-V Electro Z-Wave window or ARF Z-Wave blackout blind). In special cases, the awning can be controlled by a service button situated on it. A 12VDC power supply is required to power the awning.
VML Solar – powered by solar battery and operated by means of a remote control. In can be controlled using three modes: automatic (self-activating rolling up and unrolling dependent on the level of insolation), semi-automatic (self-activating unrolling, rolling up via a remote control), operated via supplied remote control. The Solar awning blind is powered by a 15VDC battery pack which is built into the cassette and recharged by the solar panel.
VML Electro 230* – powered by mains supply and operated via a wall switch (switch must be purchased separately). No power supply is required for the blind – the blind can be connected to 230V mains supply.
VML Electro 12*– powered by 15VDC mains supply and operated via a wall switch (switch must be purchased separately). In special cases, the awning can be controlled by a service button situated on it. A 15VDC power supply is required to power the awning.
VML Electro Solar* – powered by the solar panel (battery pack included) and operated by means of a wall switch (switch must be purchased separately). In special cases, the awning can be controlled by a service button situated on it.

* available at request

Distribution Contact

VML Z-Wave
- Z-Wave system
- wall switch
- remote control
VML Solar
- powered by solar battery
- automatic control
VML Electro 230
- wall switch
VML Electro 12
- wall switch
  (switch must be purchased separately)

Relative open area

Price group I - fabric with 10% relative open area

Relative open area

Price group II - fabric with 1% relative open area

Relative open area

Price group III - fabric with 6% relative open area

Relative open area

Price group III - fabric with 4% relative open area

Colours of VML - Price group I

* In awning blinds with fabric 089, where the width exceeds 2100mm, the fabric consists of two parts and is joined together in the middle of the awning (horizontal welded connection).

Colours of VML - Price group II

* In awning blinds with fabric featuring 1% relative open area, where the width exceeds 2400mm, the fabric consists of two parts and is joined together in the middle of the awning (horizontal welded connection).

Colours of VML - Price group III - fabric with 6% relative open area

Colours of VML - Price group III - fabric with 4% relative open area

*In the case of 4% relative open area, products will come with the fabric consisting of two parts connected in the middle (horizontal welded connection). In the case of samples 710 – 716, for dimensions close to the maximum size, the fabric can consist of three parts.